Danh mục sản phẩm
TIN TỨC
Trang chủ ›› Sản phẩm ›› Hệ thống điều khiển xả khí chữa cháy ›› Gas Fire-Extinguishing System
Gas Fire-Extinguishing System

TC-L5719 Gas Extinguishing Indicator

 

▪ The indicator is installed outside extinguishing zone, when extinguishing is in operation, it lights up and shows “EXTINGUISHING! DO NOT ENTER!” to prevent personnel entering and cause damage

Voltage:Loop : DC24V(16V~28V)
Current:≤250mA
Operating Environment:Temperature: -10°C~+55°C; Relative Humidity: ≤95%,(40±2℃)
Dimension (L×W×H):298mm×30mm×135mm
Approval:CE

 

JB-QB-QTC5015Gas Fire-extinguishing Control Panel-tiancheng(TC)
Gas fire-extinguishing system is mainly used in environments that are not suitable for setting water fire extinguishing system and other fire extinguishing systems, such as computer room, important library archives, mobile communication base station (room), UPS room, battery room, general diesel generator room, etc.
 
 

▪ Color menu display

▪ Max 4 fire protection zones and 1 fire alarm loop

▪ Max 6 direct control points

▪ Networking function

▪ Built-in printer

▪ Wall-mounted structure ,compact and exquisite

▪ Connection with field devices through loop control

▪ The system is a combination of alarm, linkage and gas fire-extinguishing

▪ Devices can be connected include smoke detector, heat detector, flame detector, MCP, emergency start/abort button, sounder strobe, gas spray indicator, auto/manual switch module and I/O module

Technical Specifications

Mains supply

AC220V (3A),Voltage range: +10%~-15%

Standby battery

DC12V/12AH sealed lead acid battery *2

LCD screen size

4.3-inch color LCD screen

Operating Environment

Temperature: 0°C~+40°C;Relative Humidity: ≤95%, non-condensing

Capacity

510 addressable points

Communication Interface

RS485、CAN、USB

Dimension (L×W×H)

385mm×134mm×510mm

 

 

TC-S5701Auto/Manual Switch Module-tiancheng(TC)
It is used to control the gas fire extinguishing partition where the module is located between manual state and automatic state Conversion.
 
 

▪ Conversion Between manual operation mode and automatic operation mode

▪ Installed at the entrance of the protected area

▪ In manual state, systems will not linkage

▪ In automatic state, systems will linkage

▪ Configurable with JB-QB-QTC5015 Gas Fire-Extinguishing Control Panel

Technical Specifications

Operating voltage

Loop: 24V (16V~28V)

Operating current

≤1mA

Operating Environment

Temperature: -10°C~+55°C,Relative Humidity: ≤95%, non-condensing

Indicator

Red

Material and color of enclosure

ABS; Porcelain white

Weight

About 110g (with base)

Mounting hole distance

60mm

Dimension (L×W×H)

86mm×38mm ×86mm(with base)

 

 

TC-S5713Emergency Start/Abort Switch-tiancheng(TC)
Its main function is to press the emergency start button immediately if the on-site personnel find a fire, which can assist the TC-QTK4 gas fire extinguishing controller to start the gas fire extinguishing program. You can also press the emergency stop button for gas fire extinguishing to terminate the execution of gas fire extinguishing program before gas spraying.
 
 

TC-S5713 Emergency Start/Abort Button

 

 

▪ Non-polarized two bus system

▪ Installed at the entrance of the protected area

▪ When fire occurs, press emergency start/abort switch

▪ Special key resettable

Technical Specifications

Operating voltage

DC24V (DC16V~DC28V)

Operating current

≤1mA

Operating Environment

Temperature: -10°C~+55°C,Relative Humidity: ≤95% (40±2°C)

Indicator

Red,Flashes when polling Illuminates in action

Material and color of enclosure

ABS; Porcelain white

Weight

About 110g (with base)

Mounting hole distance

60mm

Dimension (L×W×H)

80mm×55mm×100mm (with base)

 
SẢN PHẨM KHÁC
TRANG CHỦ | GIỚI THIỆU | SẢN PHẨM | DỊCH VỤ | TIN TỨC | CÔNG TRÌNH | ĐỐI TÁC | LIÊN HỆ
CÔNG TY TNHH TƯ VẤN KỸ THUẬT THƯƠNG MẠI MÔI TRƯỜNG WINFIRE © 2015. All rights reserved